Install the HT-IRLCR

Box Contents

Your box should contain:

• speaker

• 3 × grilles

• 2 × port plugs

• 4 × adhesive feet

• foot mounting template

Ensure your mounting surface is able to hold three times the weight of the speaker.

Swipe to continue

Click to continue

Attach the grilles

Place the magnetic grilles over the speakers.

Attach the feet

You can select a horizontal or vertical install. Use the enclosed template to attach the feet properly to the bottom of the speaker. Be sure to align the rounded corners of the feet correctly.

Remove the shorting bar (optional)

This speaker is designed for biamplification. If you wish to use it, loosen the nuts and remove the shorting bars (shown in yellow).

Attach the wires

Connect your wires to the speaker binding posts (strip the wires or use banana plugs).

Plug the rear ports

If you will be placing this speaker in a cabinet or a recessed area, you may wish to insert the foam plugs in ports at the rear of the speaker. This prevents unwanted buzzing caused by the environment.

Complete the Install

Place the speaker in the desired location, and you're done!